EasyManuals Logo

Fujitsu ARTG45LHTB User Manual

Fujitsu ARTG45LHTB
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
En-26
11
5-4-2. Display setting
Youcanselect[On](display)or[Off](non-display)forthelter
sign icon indication.
Note
When you set this setting to [Off], the filter sign icon
willnotbedisplayedregardlessofthenecessityoflter
cleaning on the indoor unit.
1
In the “Filter sign” screen, select [Display] with the [Cur-
sor button (Up/Down)], and press the [Enter button].
Following screen is displayed.
Screen
Display
Filter sign reset
Filter sign
Initial
Off
Mo
10:00
Setting:
Back:
2
Select [On] or [Off] with the [Cursor button (Up/Down)],
and press the [Enter button].
Screen
Display
Filter sign reset
Filter sign
Initial
On
Mo
10:00
Cancel:
OK:
Whenyousetthissettingto[On],andairltercleaningonthe
indoor unit is required, the icon is displayed on the “Monitor”
screen.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Cool
Monitor
High
°
C
26
Menu
Filter sign
Mo
10:00
End:
In “Submenu” screen, select [Filter sign] with the [Cursor but-
ton (Up/Down)], and press the [Enter button].
Date and time
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Mo
10:00
Setting:
Back:
Submenu
[
1/2
]
“Filter sign” screen is displayed.
Screen
Display
Filter sign reset
Filter sign
Initial
Off
Mo
10:00
Setting:
Back:
5-4-1. Filter sign reset setting
Ifltersignicon is displayed on the “Monitor” screen,
cleantheairlterontherelevantindoorunitrst,andthen
resettheltersignasfollows:
Note
Beforeresettingtheltersignonthisremotecontroller,
cleantheairlterontherelevantindoorunitbyreferring
the operating manual.
1
In the “Filter sign” screen, select [Filter sign reset] with
the [Cursor button (Up/Down)], and press the [Enter
button].
Screen
Display
Filter sign reset
Filter sign
Initial
On
Mo
10:00
Setting:
Back:
Following screen is displayed.
The filter sign will be reset. OK?
No
Yes
2
Select [Yes] or [No] with the [Cursor button (Left/Right)],
and press the [Enter button].
When [Yes] is selected, the lter sign icon on the dis-
play is turned off.
9374379866_OM_EN.indd 26 17/12/2014 13:19:32

Table of Contents

Other manuals for Fujitsu ARTG45LHTB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ARTG45LHTB and is the answer not in the manual?

Fujitsu ARTG45LHTB Specifications

General IconGeneral
BrandFujitsu
ModelARTG45LHTB
CategoryAir Conditioner
LanguageEnglish

Related product manuals