Fujitsu ARTG45LHTB User Manual

En-21
6.Tonalizethesettingyouhavesetinstep5, select [End]
with the [Cursor button (Up/Down)], and press the [Enter
button].
Example: Weekly timer setting screen for Zone (single)
1
Weekly
1
Day
Time
End
Su Mo
5 00
On
Weekly timer setting
Time 8
Time 2
Mo 10:00
Back:
Setting:
Heat
20
°
C
Zone
(
sin
g
le
)
Sensor: Secondary RC
Zone 1 Zone 2
Zone 3 Zone 4
Zone 5 Zone 6
Zone 7
Zone 8
Ifyoupressthe[Cancelbutton]beforeyounalizetheset-
ting,followingcancelconrmationscreenisdisplayed.
Setting change will be canceled. OK?
No
Yes
Select [No] or [Yes] with the [Cursor button (Left/Right)], and
press the [Enter button].
If you select [Yes] and press the [Enter button] here, all the
congureditemsinstep5willbecanceled.
If you select [No] and press the [Enter button] here, the
“Weekly timer setting” screen is displayed. To
nalizethe
setting, select [End] with the [Cursor button (Up/Down)] and
press the [Enter button].
Notes
• If any names have been registered for zones and
sensors in [Zone user setting], the registered names
are displayed on this screen.
• Onlyconnectedzonesandsensoraredisplayed.
• When the
“Weekly timer setting” screen is displayed
again after finalizing the setting, the set patterns you
have registered will be sorted in time order. (Sorting
function)
When you return to the “Monitor” screen, the icon is displayed.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Cool
Monitor
High
°
C
26
Menu
Weekly timer : Weekly 1
Mo 10:00
End :
Zone
(
single
)
4-2-4. Auto-off timer setting
1
In “Timer” screen, select [Auto-off timer] with the [Cursor
button (Up/Down)], and press the [Enter button].
Function
Timer
On timer
Off timer
Weekly timer
Auto-off timer
Disable
Disable
Disable
Mo 10:00
Disable
Setting:
Back:
2
“Auto-off timer” screen is displayed.
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Disable
30min.
Start End
Mo 10:00
0:00 0:00
Back:
Setting:
Weekly timer
On timer
To change the setting, select the item with the [Cursor
button (Up/Down)], and press the [Enter button].
3
For [Enable/Disable setting], select [Enable] or [Disable]
with the [Cursor button (Up/Down)], and press the [Enter
button] to complete the setting.
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Enable
30min.
Start End
Mo 10:00
0:00 0:00
Weekly timer
On timer
Cancel:
OK:
4
For [Stop in], adjust the timer with the [Cursor button
(Up/Down)]. To complete the setting, press the [Enter
button].
On timer Weekly timer
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Enable
120 min.
End
Mo 10:00
0:00
0:00
OK:
Cancel:
Start
Note
The set time can be set from 30 to 240 minutes in units
of 10 minutes.
9374379866_OM_EN.indd 21 17/12/2014 13:19:30

Fujitsu ARTG45LHTB Specifications

General

Brand	Fujitsu
Model	ARTG45LHTB
Category	Air Conditioner
Language	English