Fujitsu ARTG45LHTB User Manual

En-3
1-3. Remote controller overview
CAUTION
Pressthebuttonlightlywithanger.Itmaycauseafailure
if pressed with excessive force.
Do not press the screen too hard. It may cause a failure.
(1)
(2)
(3)
(4)
(5)(6)
(8)
(7)
(1) Display panel (with backlight)
Backlights when you press any button.•
Depending on the operation or setting, the content •
changes.
The brightness, contrast, and automatic light-off setting •
of the backlight can be adjusted.
Refer to “5. SUBMENU SETTING”.
NOTE: While the backlight is off by the automatic light-
off, the rst button operation does not work, and
the backlight illuminates. (The On/Off button is
excluded.)
While the backlight is set to [Off], it is effective
fromtherstbuttonoperation.
(2) Screen switch button (Left/Right)
Backwards the screen to previous setting item or forwards
the screen to next setting item.
Ex.) “Date” screen
Change display format
Time
OK:
Cancel:
OK:
Cancel:
Change display format
Date
Screen switch
button (Right)
Screen switch
button (Left)
NOTE: These buttons are active only when any com-
binations of or and the relevant screen
namesaredisplayedintheblackeldatthebot-
tom of the screen.
(3) Menu button
When you press this button while the “Monitor” screen is
displayed, it switches to the “Menu” screen.
If you press the button again “Menu” screen, it switches to
the “Submenu” screen.
1-2. Features and functions
INVERTER
At the start of operation, large amount of power is used to
bring the room quickly to the desired temperature. Afterwards,
the unit automatically switches to a low power setting for eco-
nomic and comfortable operation.
ECONOMY OPERATION
When Economy operation mode is operated, the room
temperature will be a little higher than the set-temp under
Cooling mode and lower than set-temp under Heating mode.
Therefore, the Economy operation mode is able to save more
energy than other normal modes.
AUTO CHANGEOVER
The operation mode (Cooling, Dry, Heating) is switched auto-
matically to maintain the set temperature, and the temperature
is kept constant at all times.
WEEKLY TIMER
Use this timer function to set operating times for each day of
the week. Use the Day off setting to switch off timed operation
for a selected day in the coming week. Because all days can be
set together, the weekly timer can be used to repeat the timer
settings for all of the days.
WIRED REMOTE CONTROLLER
The wired remote controller allows convenient control of indoor
unit operation.
WIRELESS REMOTE CONTROLLER (OPTION)
The optional wireless remote controller can be used. When
you use the wireless remote controller, there are the following
differences as compared with using the wired remote
controller.
[Additional functions for wireless remote controller]
•SLEEPtimer
•TIMER
•10°CHEAToperation
You can use both wireless and wired remote controller
simultaneously, however, the functions listed above will be
restricted.
ZONE CONTROL
Thisfunctionenablesefcientair-conditioningbyselecting
speciczonesfromthevariouszonesdividedwithinthe
indoor space.
To use this function, installation of the optional "Zone control
interface" is necessary. For details, please consult your dealer
or authorized service personnel.
9374379866_OM_EN.indd 3 17/12/2014 13:19:24

Fujitsu ARTG45LHTB Specifications

General

Brand	Fujitsu
Model	ARTG45LHTB
Category	Air Conditioner
Language	English