En-29
5-9-1. Day/Night setting
You can register zone(s) and room-temperature sensor to
each group of “Day” and “Night”.
1
In “Zone user setting” screen, select [Day/Night setting]
with the [Cursor button (Up/Down)], and press the [Enter
button].
Zone user setting
Day/Night setting
Name setting
Date and time
Mo
10:00
Setting:
Back:
Management
“Day/Night setting” screen opens.
Day/Night setting
Day setting
Night setting
Name setting
Mo
10:00
Setting:
Back:
2
Select [Day setting] for the registration of group “Day”,
and select [Night setting] for the registration of group
“Night”, with the [Cursor button (Up/Down)]. When you
press the [Enter button], registerable zones and room-
temperature sensor are displayed.
As an setting example, Zone 1 to 8 are supposed to be
connected in “Day setting” screen in following instruc-
tions.
Setting procedures are common to [Day setting] and
[Night setting].
Day setting
Zone 1
Zone 3
Zone 5
Zone 7
Zone 4
Zone 2
Zone 6
Zone 8
Sensor
Indoor unit
Night setting
Mo
10:00
Back:
Remove:
5-8-2. Temperature unit setting
1
In “Initial” screen, select [Temp. unit] with the [Cursor
button (Up/Down)], and press the [Enter button].
Initial
Language
English
Temp. unit
Password setting
(
Management
)
°C
Filter sign
Management
Mo
10:00
Setting:
Back:
2
Select [°C] or [°F] with the [Cursor button (Up/Down)]
and press the [Enter button].
The screen returns to the “Initial” screen.
Language
Temp. unit
Temp. unit
°
c
Mo
10:00
OK:
Cancel:
5-9. Zone user setting *
In “Submenu” screen, select [Zone user setting] with the [Cur-
sor button (Up/Down)], and press the [Enter button].
Initial
Management
Zone user setting
Monitor
Submenu
2/2
Mo
10:00
Back:
Setting:
“Zone user setting” screen opens.
Zone user setting
Day/Night setting
Name setting
Date and time
Mo
10:00
Setting:
Back:
Management
9374379866_OM_EN.indd 29 17/12/2014 13:19:33
To Next Page
Loading...
Need help?
General
