Fujitsu ARTG54LHTC - Basic Operations; 2-1. Starting and On;Off Operation

- (01 - 05) -
DUCT TYPE ARTG54LHTC DUCT TYPE ARTG54LHTC
Set temperature upper and lower limit setting
z
The set temperature range can be ●
set for each operation mode.
(Cooling / Heating / Auto)
Original temp.
setting range
Lower limit
setting
During Cooling
30
25
18
Original temp.
setting range
Upper limit
setting
During Heating
(°C)
30
25
16
(°C)
Weekly timer function
z
Not only time setting On/Off, but also setting of the operation mode and set temperature can be ●
set by Weekly timer function.
Two types of setting: Weekly 1 and Weekly 2 for summer and winter are possible.
Weekly 1
Set Temp.
Time
26
(°C)
20
21
22
23
24
25
Set Temp.
26
(°C)
20
21
22
23
24
25
10:00
22°C
12:00 14:00 17:00 20:00 23:59
Setting menu in
remote controller
On
Off
Weekly 2
Time
10:00 12:00 14:00 17:00 20:00 23:59
Setting menu in
remote controller
On
Off
Weekly 1
Set Temp.
Time
26
(°C)
20
21
22
23
24
25
Set Temp.
26
(°C)
20
21
22
23
24
25
10:00
22°C
12:00 14:00 17:00 20:00 23:59
Setting menu in
remote controller
On
Off
Weekly 2
Time
10:00 12:00 14:00 17:00 20:00 23:59
Setting menu in
remote controller
On
Off
Child lock
z
This function locks all control. ●
Part lock
z
This function locks the setting of functions other ●
than Mode, Set temp., Fan.
Management (Pass word)
z
Unwanted functions can be restricted. ●
Password is necessary to operate. ●
Functions with this mark are restricted.