Fujitsu B20T-6 LED - Operation; Switching the Device on and off

Operation
Operation
Switching the device on and off
1 2
12
1 = Sw itch On/Off 2 = Power supply indicator
The c
olour of the LED indicator changes as follows:
LED indicator Status
blue
Monitor and computer are switched on (normal mode).
green
Mon
itor and computer are switched on (ECO mode).
orange
Mo
nitor is not receiving a video signal or is in power saving mode.
d
oes not light up
The monitor is switched off (or is in power saving mode - power
consumption in standby and o ff m od e ≤ 0.5 W).
► Switch the device on again with the ON/OFF switch (1).
Fujitsu Technology Solutions 19