Operation
Changing the monitor settings
When putting the monitor into operation for the first time, the screen d isplay should
be op timally adapted to the disp lay adapter used.
Changing the monitor setti
ngs with the bu ttons
of the control panel
The buttons of the control panel have two functions. When the OSD menu is
active, the current meaning of the buttons is shown directly over the buttons
on the edge of the screen (softkeys). W ith the O SD menu not activated,
you can make the following settings directly:
123
1 = Bu ttons for the OSD menu (On
Screen Display)
2 = ON/OFF switch
3 = Power supply indicator
Softkeys
Switch to submenu
Start ( with Auto lev el and Factory recall)
Navigation within a menu
Select
option
+-
Change value
Apply ch anges and return to main menu
Reje
ct changes and return to main menu
Exi
t the OSD menu
Fujitsu Technology Solutions 21
To Next Page
Loading...
Need help?
General