Operation
Setting functions in the Advanced menu
Call up the Advanced setting window
Input select
Selecting the input signal
This function allows you to s witch the m onitor from analogue to digital mode
and vice versa, when several signal sources are connected.
This requires that the graphic card used supports this function.
DDC-CI
Activation/deactivation of the DDC-CI
On = The DDC-CI funct ion is enabled (standard se tting)
Off = The DDC-CI function is disabled
ACR
Enable/disable ACR function
On = The ACR function is enabled
Off = The ACR function is disabled (default setting)
Factory Recall
Activating the factory settings
With th is function all settings are reset to the factory settings without
prompting for confirmation.
Press the
button to activate the function. The message Auto
Processing is d isplayed.
Displaying in
formation
Call the Inform ation setting window
With this function, the model designation, s erial numb er, resolution, H/V
frequency, input signal, colour setting and polarity of the synchronisation
signal are displayed.
28 Fujitsu Technology Solutions
To Next Page
Loading...
