EasyManua.ls Logo

Fujitsu D2607 - Features

Fujitsu D2607
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
Modular RAID Controllers
Modular RAID 6Gb/s (SAS2.0)
4.2.1 Features
●
Industry-proven MegaRAID
®
data protection
●
Flexibility for both SAS 2.0 and SATA II
●
Advanced management and configuration suites
●
Supports RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60
●
Optionally secured with BBU
●
Offers advanced MegaRAID functionality to integrated LSI SAS
●
3.3 V / 12 V PCIe add-in card
●
8-lane 5.0 Gbit PCIe host bus
●
8 SAS/SATA ports
●
Each SAS/SATA port supports SSP, SMP and STP
●
Support for the following STP features:
– Addressing of SATA targets through expander
– Native Command Queuing (NCQ)
●
Support of the following SSP features:
– Wide port functionality (2 or 4 Phys from a single quad port)
– Narrow port functionality (1 Phy)
– Compatible with SATA target devices
●
2
Mini SAS 4i
SFF-8087 connectors
●
Hot-plug drives
●
SGPIO interfaces for signaling of SAS/SATA ports
●
Hardware XOR for RAID parity calculations
●
72-bit wide 512 MB of DDR2 800 (with ECC)

Table of Contents