Fujitsu D2607 - Features; Controller Versions

48 Modular RAID Controllers
Modular RAID 6Gb/s (SAS2.0)
4.3.1 Features
● Industry-proven MegaRAID
®
data protection
● Flexibility for both SAS 2.0 and SATA II
● Advanced management and configuration suites
● Supports RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60
● Optionally secured with BBU
● Offers advanced MegaRAID functionality to integrated LSI SAS
● 12 V PCIe add-in card
● 8-lane 5.0 Gbit PCIe host bus
● 8 SAS/SATA ports
● Each SAS/SATA port supports SSP, SMP and STP
● Support for the following STP features:
– Addressing of SATA targets through expander
– Native Command Queuing (NCQ)
● Support of the following SSP features:
– Wide port functionality (2 or 4 Phys from a single quad port)
– Narrow port functionality (1 Phy)
– Compatible with SATA target devices
● 2 x SATA connectors for internal hard disk drives, 1 x SAS lane each
● 1 x Midplane connector, 4 x SAS lanes
● Hot-plug drives
● SGPIO interfaces for signaling of SAS/SATA ports
● Hardware XOR for RAID parity calculations
● 72-bit wide 512 MB of DDR2 800 (with ECC)
4.3.2 Controller versions
Name Chip Cache No. of SAS channels
S26361-D3016-Ax LSI SAS2108 512 MB
2 for internal disk drives
4 for Storage Blade Connection