Getting started
Connecting external devices to the USB ports
USBdevices,USBport,Externaldevices,Devices,
You can connect a wide range of external devices to the USB ports (e.g .
printer, scanner, mouse or keyboard).
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in t he documentation for the U SB devices.
► Connect the data cable to the external device.
► Connect the data cable to one of the USB p orts on your device.
Device drivers
External USB devices which you connect to one of the USB ports don’t usually
need their own drivers because the softw are required is already included in
the operating system. If the device requires separate software, please follow
the instructions in the manufacturer’s documentation.
Switching on for the first time: installing the software
Installing,Software,Installing,
Once the installation has been started the device must not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The insta llation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
Ifthedevicei
s integrated into a network, the user and server details as well as
the network pr
otocol are required during the software installation.
Contact your
network administrator if you have any questions about these settings.
When you swi
tch on the device for the first time, the supplied software
is installe
d and configured. Plan a reasonable amoun t of time for this,
as this pro
cess must not b e interrupted.
You may nee
d the licence number for Window s during the installation. You can find the licen ce
number as
a label on your device (no longer applies to Windows 8 or higher).
18 Fujitsu
To Next Page
Loading...
