Operation
Mechanically protecting and locking the casing
Your device has provision for a security lock (4). Using th e s ecurity lock provision and
the Kensington Lock cable (steel cable, accessory) you can protect your device against
theft. Please consult the manual for your Kensington Lock.
To preve nt unauthorised persons from opening the casing, the casing can b e sealed (1) or it can
be secured with a padlock. To do this, feed the sealing chain through the eye (2) and seal the
chain with the lead seal. Alternat ively, pass a suitable padlock through the eye (2).
Lead-sealingAnti-theftprotectionSecurityLockChainPadlockProtect
2
1
2
3
4
1 = Lea d seal
2 = Eye for pa dlock / lead seal (diameter 6 mm)
3 = Casing lock (optional)
4 = Provision for security lock
With the casing lock (3) you can mechanically lo ck the casing to prevent unauthorised persons
from opening it. T he keys can be found a t the rear of your device.
In addition to the casing lock, an open andaclosedlock are also illustrated.
• Key turned tow ards the closed lock: The device is locked.
• Key turned towards the open lock: The device is not locked.
L
ocking the casing
► Turn the key towards the closed lock .
Unlocking the casing
► Turn the key toward s the open lock .
24 Fujitsu
To Next Page
Loading...
