Fujitsu ESPRIMO D55 Series - Reinstalling a Slot Cover

80 pages

To Next Page

To Previous Page

System expansio ns

Reinstalling a slot cover

► Push the slot cover into the slot (1).

► Tighten the screw (2, optional).

Fujitsu 61

Main Page

Table of Contents7
Your ESPRIMO9
Validity of the Reference Manual9
Notational Conventions10
Ports and Operating Elements11
Front11
Rear12
Important Notes13
Safety Information13
Transporting the Device13
Cleaning the Device14
Energy Saving, Disposal and Recycling14
Getting Started15
Unpacking and Checking the Delivery15
Steps for Initial Setup15
Setting up the Device16
Vertical Operating Position with Feet (Optional)16
Connecting the Device to the Mains Supply18
Connecting External Devices19
Ports on the Device19
Connecting a Monitor20
Connecting the Mouse20
Connecting the Keyboard21
Connecting External Devices to the Serial Interface21
Connecting External Devices to the USB Ports22
Switching on for the First Time: Installing the Software22
Switch on the Monitor and the Machine23
Installing the Software23
Operation24
Switch the Device on24
Switching off the Device24
Procedure in an Emergency24
Indicators on the Device25
Keyboard26
Important Keys and Keyboard Shortcuts26
Settings in BIOS Setup27
Property and Data Protection27
Mechanically Protecting and Locking the Casing28
BIOS Setup Security Functions29
Access Authorisation Via Smartcard29
Operating the Smartcard Reader (Optional)29
Problem Solutions and Tips30
Help if Problems Occur30
Troubleshooting30
Power-On Indicator Remains Unlit after You Have Switched on Your Device30
The Device Cannot be Switched off with the ON/OFF Switch31
Monitor Remains Blank31
No Mouse Pointer Displayed on the Screen32
Time And/Or Date Is Not Correct32
Smartcard Reader Is Not Recognised32
Smartcard PIN Forgotten33
Error Messages on the Screen33
Installing New Software33
Tips33
System Expansions34
Information about Boards35
Removing the Casing Cover36
Reattaching the Casing Cover37
Overview of Drive Bays and Drives in Your Device38
Changing the Drive Cover39
Installing and Removing an Accessible Slimline Drive in the Upper Bay (Optional)42
Installing the Drive Plate for the Slimline Drive42
Installing a Slimline Drive44
Removing a Slimline Drive45
Opening and Closing the Drive Cage47
Opening the Drive Cage47
Closing the Drive Cage48
Installing and Removing 2½ Inch Drives in a 3½ Inch Adapter49
Installing 2½ Inch Drives in a 3½ Inch Adapter49
Removing 2½ Inch Drives from a 3½ Inch Adapter51
Installing and Removing Drives in the Lower Bay (Optional)52
Installing and Removing a 3½ Inch Drive or a 3½ Inch Adapter52
Installing and Removing a 2½ Inch Drive (Screw Fastened)55
Installing and Removing Drives in the Middle Bay (Optional)57
Installing a 3½ Inch Drive57
Removing a 3½ Inch Drive59
Installing and Removing an M.2 Module60
Installing an M.2 Module60
Removing an M.2 Module61
Installing and Removing Low-Profile Boards62
Opening the Board Retaining Mechanism62
Removing a Slot Cover63
Installing a Board64
Removing Boards64
Reinstalling a Slot Cover65
Closing the Board Retaining Mechanism66
Installing and Removing WLAN Antennas67
Installing WLAN Antennas67
Removing WLAN Antennas68
Installing a Serial Port69
Installing and Removing Heat Sinks72
Removing the Heat Sink72
Installing the Heat Sink73
Mainboard Expansions74
Upgrading Main Memory74
Processor, Replacing74
Replacing the Lithium Battery75
Technical Specification76
Index78

Fujitsu ESPRIMO D55 Series - Reinstalling a Slot Cover

Table of Contents

Related product manuals