Fujitsu Eternus DX500 S3 - Power Control; Figure 22 Power Synchronized Unit Diagram

Power Control
Power control methods for the
ETERNUS DX are described below.
•
Power synchronized unit
•
Wake On LAN
■
Power Synchronized Unit
A power synchronized unit detects changes in the AC power output of the Uninterruptible Power Supply (UPS)
unit that is connected to the server and automatically turns on and off the ETERNUS DX.
For more details about power synchronized units, refer to "Configuration Guide (Power Synchronized Unit)".
Figure 22 Power Synchronized Unit Diagram
RS232C cable
ServerServer
Power synchronized
unit
ETERNUS DX
OFF
UPS
for server
UPS
for server
ON
AC cableAC cable AC cable
AC cable
3. Basic Functions
Operation Management
47
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
Overview
Copyright 2019 FUJITSU LIMITED
P3AM-7702-29ENZ0