Fujitsu Eternus DX500 S3 - Drive Enclosure; Figure 45 Front View of a 2.5 Type Drive Enclosure; Figure 46 Rear View of a 2.5 Type Drive Enclosure

Drive Enclosure
This section explains the main components in the drive enclosure.
The drive enclosure contains drives installed in the front, and I/O modules and power supply units in the rear.
Three types of drive enclosures are available; a 2.5" type, a 3.5" type, and a high-density type.
Drive enclosures can be added during system operation. When an error occurs, replacement operations can be
performed while the system is running.
■
External Views of a 2.5" Type Drive Enclosure
● Front View
Figure 45 Front View of a
2.5" Type Drive Enclosure
1
1. 2.5" disk or 2.5" SSD
● Rear View
Figure 46 Rear View of a 2.5" Type Drive Enclosure
3 4
1 2
5 6
3 4
1. I/O module (IOM#0)
2. I/O module (IOM#1)
3. Drive interface (IN) port
4. Drive interface (OUT) port
5. Power supply unit (PSU#0)
6. Power supply unit (PSU#1)
6. Hardware Configurations
Drive Enclosure
75
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
Overview
Copyright 2019 FUJITSU LIMITED
P3AM-7702-29ENZ0