Fujitsu Eternus DX500 S3 - Power Distribution Unit (Only for Regions Other than the EMEIA, Central American, and Caribbean Regions); Figure 52 Power Distribution Unit (AC200-240 V, 1 U, 4 Outlets); Table 19 Power Distribution Unit (AC200-240 V, 1 U, 4 Outlets) and Provided AC Cable Specifications

Power Distribution Unit (Only for Regions other than the EMEIA,
Central American, and Caribbean Regions)
There are two sizes for power distribution units: 1U and 2U. In addition, multiple types of exteriors are available.
A power distribution unit is an option to connect power supply units to power outlets when power sockets are
limited.
■
Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
There are four outlets and two inlets.
Figure 52
Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
1
2
1. Inlet (INPUT)
2. Outlet (OUTPUT)
The specifications of a power distribution unit and the AC cables that are provided are shown below.
Table 19 Power Distribution Unit (AC200-240V, 1U, 4 Outlets)
and Provided AC Cable Specifications
Item Specifications
Power Voltage AC 200 – 240V
Phase Single
Frequency 50Hz/60Hz
Input cable Connection type
IEC60320 C13 n NEMA L6-15P
Length 4m
Quantity 2
6. Hardware Configurations
Power Distribution Unit (Only for Regions other than the EMEIA, Central American, and Caribbean Regions)
83
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
Overview
Copyright 2019 FUJITSU LIMITED
P3AM-7702-29ENZ0