Chapter 1
Workflow
This manual is used when performing the setup procedures described in the "Setting Up the ETERNUS DX"
section of the "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
(SAS)" for each OS.
Required Documents
•
ETERNUS Web GUI User's Guide
Workflow
Setting the SAS Port Parameters
Set the to-server connection type.
•
"2.1.1 Setting the To-server Connection Type (Setting the SAS Port Parameters)
" (page 8)
Setting the LUN Groups
Set the server accessible LUN groups.
•
"2.1.2 Creating the Server Accessible LUN Groups (Setting the LUN Groups)
" (page 8)
Setting the Host Responses
Set the host responses to match the connection configuration.
•
"2.1.3 Setting the Host Responses
" (page 9)
6
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
P3AM-8542-04ENZ0
To Next Page
Loading...
