Fujitsu Eternus DX600 S3 - Page 48

Chapter 3 Initial Setup
3.2 Initial Setup 2
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
48
9-3 Click the [OK] button.
 Returns to the original screen.
9-4 Repeat Step 9-1 through Step 9-3 to configure information for several traps.
9-5 When the setting of the trap information is complete, click the [Next >>] button.
 A confirmation screen appears.
9-6 Click the [OK] button.
 The SNMP Agent Trap setting starts.
9-7 Click the [Done] button.
10 Proceed to [Setup E-Mail Notification].
10-1 Specify the parameters.