Fujitsu Eternus DX600 S3 - Page 93

Chapter 5 Host Interface Management
5.5 Add Host Groups
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
93
■ When registering a host by manually specifying the host
(1) Click the [Manual Input] tab.
(2) Click the [Add] button.
 The [Add FC/FCoE Host] screen appears.
(3) Manually specify the WWN of the host that is to be registered.
The main setting item is as follows.
● Host Setting
- WWN
(4) Click the [OK] button.
 Returns to the [Manual Input] screen.
(5) Repeat Step (2) through Step (4) to set more WWNs.