Chapter 4 Setting the Backup Software
4.5 NetVault
FUJITSU Storage ETERNUS LT20 S2/LT40 S2/LT60 S2 Tape Library User’s Guide -Server Connection-
Copyright 2021 FUJITSU LIMITED P3AM-5322-12ENZ0
63
6 After confirming that the checkboxes are set correctly, click the [OK] button to go back to the
[Manage Devices] page in the tree view mode.
The setting of one drive is now complete. When using multiple drives, set the other drives in the
same way.
After setting all the drives, proceed to the library setting.
7 In the [Manage Devices] page, switch the page view to the tree view mode, click the name of
the library, and select [Modify] from the menu that appears.
8 Click the library name that appears under [Library Configuration] and click [Configure] from the
menu that appears.
To Next Page
Loading...
