Fujitsu ETERNUS - Page 16

Chapter 4 Logical Unit Recognition
>
ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris
16
Copyright 2010 FUJITSU LIMITED
P3AM-4562-01ENZ0
2 Use the following command to confirm that the storage system and all the logical
units have been correctly recognized.
End of procedure
# format
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@780/pci@0/pci@9/scsi@0/sd@0,0
1. c2t500000E0D0400006d0 <FUJITSU-E2000-0000 cyl 379 alt 2 hd 64 sec 256>
/pci@7c0/pci@0/pci@8/bfa@0/fp@0,0/ssd@w500000e0d0400006,0
2. c2t500000E0D0400006d1 <FUJITSU-E2000-0000 cyl 379 alt 2 hd 64 sec 256>
/pci@7c0/pci@0/pci@8/bfa@0/fp@0,0/ssd@w500000e0d0400006,1
3. c3t500000E0D0400086d0 <FUJITSU-E2000_0000 cyl 379 alt 2 hd 64 sec 256>
/pci@7c0/pci@0/pci@8/bfa@0,1/fp@0,0/ssd@w500000e0d0400086,0
4. c3t500000E0D0400086d1 <FUJITSU-E2000-0000 cyl 379 alt 2 hd 64 sec 256>
/pci@7c0/pci@0/pci@8/bfa@0,1/fp@0,0/ssd@w500000e0d0400086,1
ETERNUS Disk storage system target ID=500000E0D0400086,
lun=0 and 1 are connected to physical path /pci@7c0/pci@0/pci@8/bfa@0,1
and c3t500000E0D0400086d0 and c3t500000E0D0400086d1 are
assigned to each of these LUNs.