Fujitsu ETERNUS Connection Guide

ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris
15
Copyright 2010 FUJITSU LIMITED
P3AM-4562-01ENZ0
Chapter 4 Logical Unit Recognition
Set the server to recognize the ETERNUS Disk storage systems' logical units.
Execute the following commands to check the path of the ETERNUS Disk storage system to be
connected.
Procedure
1 Execute the following command to confirm that the server can access the logical
units.
# cfgadm -al
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c2 fc-private connected configured unknown
c2::500000e0d0400006 disk connected configured unknown
c3 fc-private connected configured unknown
c3::500000e0d0400086 disk connected configured unknown
ETERNUS Disk storage system CA (WWN:500000e0d0400086)
has been connected to the Fibre Channel card port with controller
number "c3".

Fujitsu ETERNUS Specifications

General

Category	Storage
Brand	Fujitsu
Product Line	ETERNUS
Capacity	Varies by model
Interface	SAS, iSCSI, Fibre Channel
Management Software	ETERNUS SF