EasyManuals Logo

Fujitsu ETERNUS Connection Guide

Fujitsu ETERNUS
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris
3
Copyright 2010 FUJITSU LIMITED
P3AM-4562-01ENZ0
Preface
This document briefly explains the operations that need to be performed by the user in order to
connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or
ETERNUS8000 model 700, 800, 900, 1100, 1200, 2100, or 2200 Disk storage system to a
server running Solaris OS and using Brocade Fibre Channel cards via a Fibre Channel interface.
This document should be used in conjunction with any other applicable user manuals, such as
those for the ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or
ETERNUS8000 model 700, 800, 900, 1100, 1200, 2100, or 2200 Disk storage system, server,
OS used, Fibre Channel cards, drivers, etc.
Note that this manual refers the following documents.
Server Support Matrix
ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Oracle Solaris
Also, note that in this document the ETERNUS2000 models 100 and 200, ETERNUS4000
models 300, 400, 500, and 600, and ETERNUS8000 models 700, 800, 900, 1100, 1200, 2100,
and 2200 Disk storage systems are collectively referred to as ETERNUS Disk storage systems.
First Edition
December 2010
The Contents and Structure of this Manual
This document is composed of the following four chapters and an appendix.
Chapter 1 Workflow
This describes the workflow required to establish a connection between a server with Bro-
cade Fibre Channel cards and an ETERNUS Disk storage system.
Chapter 2 Installing the Fibre Channel Card Driver
This describes how to install the Fibre Channel card driver.
Chapter 3 Setting Up the Server
This describes how to set up the server for different connection topologies.
Chapter 4 Logical Unit Recognition
This describes how to make the server recognize the ETERNUS Disk storage system LUNs
(logical units).
An appendix contains the various management tables that are used in "Chapter 3 Setting Up the
Server".

Other manuals for Fujitsu ETERNUS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ETERNUS and is the answer not in the manual?

Fujitsu ETERNUS Specifications

General IconGeneral
CategoryStorage
BrandFujitsu
Product LineETERNUS
CapacityVaries by model
InterfaceSAS, iSCSI, Fibre Channel
Management SoftwareETERNUS SF

Related product manuals