Chapter 2 Setup
> 2.5 Monitoring Multiple Target Devices
ETERNUS Disk storage systems ETERNUSmgr User Guide -Introduction-
38
Copyright 2009 FUJITSU LIMITED
P2X0-0202-04ENZ0
See "Chapter 4
Control Interfaces (Top Menu)" (page 46) for Top Menu details.
• Underlined text is displayed on screen.
• Bold text indicates the portions that have been changed.
• ETERNUSmgr is able to indicate the current status of each target
device in the top menu. This is done using the lines after link to the
Alarm History Files Directory. These lines should not be edited, but
may be deleted if target status display is not required.
<!-- Status of 000.000.000.000 -- ><font
color="red">(*Offline*)</font>
The "<font color="red">(*Offline*)</font>" portion is
dynamically changed to one of the following by ETERNUSmgr:
Normal <font color="black">(Normal)</font>
Offline <font color="red">(*Offline*)</font>
ATTENTION <font color="red"><b>(*ATTENTION*)</b>
</font>
BUSY <font color="red">(*BUSY*)</font>
To Next Page
Loading...
