Fujitsu ETERNUS - Shutting down Eternusmgr; Setting the Eternusmgr Daemon for Automatic Startup

Chapter 3 Startup and Shutdown
> 3.1 ETERNUSmgr for Solaris OS, HP-UX, AIX, and Linux
ETERNUS Disk storage systems ETERNUSmgr User Guide -Introduction-
41
Copyright 2009 FUJITSU LIMITED
P2X0-0202-04ENZ0
3.1.2 Shutting Down ETERNUSmgr
Perform the following to shutdown ETERNUSmgr for Solaris OS, HP-UX, AIX, and Linux:
Procedure
1 Become the superuser.
# su
2 Execute the execution control script with the start option:
# /opt/FJSVgrmgr/stxpoll stop
3 Confirm the daemon is no longer running:
# ps -e | grep stxpolld
(No display)
End of procedure
If you do not have authorization to become the superuser, consult with the server administrator.
3.1.3 Setting the ETERNUSmgr Daemon for Automatic Startup
The example below shows how to register the daemon for a Solaris OS installed server. The
daemon registration location and registration method may vary according to the settings of each
server (registration location will vary according to the run level in use). Therefore, refer to "1.7
Daemon Registration" in the "ETERNUSmgr Install Guide" when using HP-UX, AIX, or Linux
operating environments.
Consult with the server administrator before registering the daemon.
■ Solaris OS example
Procedure
1 Become the superuser.
# su
2 Copy the execution control script to the /etc/init.d/ directory:
# cp /opt/FJSVgrmgr/stxpoll /etc/init.d/
3 Create a link to the appropriate rc*.d directory:
# ln -s /etc/init.d/stxpoll /etc/rc2.d/Snnstxpoll (nn is a number.)
End of procedure