Fujitsu fi-4860C2

14
2.2 Connecting the Scanner
(1) Use the driver attached to the SCSI card.
You can download the driver file for each OS from the following address:
•For ASC29160
http://www.adaptec.com/worldwide/support/drivers_by_product.html?sess=no
&cat=/Product/ASC-29160
•For ASC39160
http://www.adaptec.com/worldwide/support/drivers_by_product.html?sess=no
&cat=/Product/ASC-39160
(2) Install ASPI version 4.70 or later.
If you use "FUJITSU TWAIN32 Version9.x", you do not need to install the ASPI
driver.
You can download the driver from the following address.
•For Windows 98, Windows NT 4.0, Windows Me, Windows 2000 and Windows XP
http://www.adaptec.com/worldwide/support/drivers_by_product.html?sess=no
&cat=/Product/ASPI-4.70
•For Windows 95 (Install the ASPI version 4.60.)
http://www.adaptec.com/worldwide/support/driverdetail.html?sess=no&filekey
=aspi32.exe
If you use Windows
XP, follow the procedure below beside the above operation.
Please update the driver using the patch file provided from ADAPTEC.
From Device Manager, click “Update Driver”.
You can download the update file from the following address.
file name : u160_winxp_drv_rc1.exe
http://www.adaptec.com/worldwide/support/driverdetail.html?sess=no&cat=/