Fujitsu fi-4860C2 - Document Separation Force Adjustment

AP-19
■ Document separation force adjustment
If the following error occurs frequently, adjust the brake force of the Brake roller using setup
mode.
- Double-feed
- Mis-pick
- Paper jam1
1. Enter into the setup mode.
Please refer to the section "1.3 Basic Operations of the Operator Panel" on page 6 of the fi-
4860C2 Operator’s Guide, "Using the setup and test mode."
The following screen appears.
Choose an appropriate setting based on the thickness of the document you are scanning and
the error.
By pressing (Right arrow button), the LCD display changes items from (5) to (1).
By pressing (Left arrow button), the LCD display changes items from (1) to (5).
When the desired option appears, press (Enter button) to select it.
(1)      - Document thickness: Thick
(2)      - Document thickness: Medium thick
(3)      - Document thickness: Medium
(4)      - Document thickness: Medium thin
(5)      - Document thickness: Thin
01 atp
!
ira
=
T
h
S
Thi
eno
kci
FFJJ
J
n