Fujitsu fi-5110C User Manual

fi-5110C Image Scanner Getting Started 4
4. Click [TWAIN Driver] on the window below.
5. Error Recovery Guide Installation window
appears.
Error Recovery Guide is a software that displays
troubleshooting information on screen when any
scanner error occurs. Although this software’s
installation is highly recommended, the perfor-
mance of the scanner would not be affected if
not installed.
6. Select a language used for installation on
[Choose Setup Language] window and click
[OK].
7. Follow the instructions on the window to install
the application.
8. When the [InstallShield Wizard Complete] win-
dow appears, click [Finish].
9. Your computer will be restarted.
Do not remove the Setup CD-ROM from the CD
drive until your PC has completely restarted.
Installation of the scanner driver is completed.
■ Installing ScandAll 21
"Scandall 21" is an image capturing software that com-
plies with the TWAIN standard. The FUJITSU TWAIN
32 scanner driver enables you to capture images with a
FUJITSU image scanner fi-series product.
1. Insert the Setup CD-ROM into the CD drive.
⇒ <SETUP DISK START UP SCREEN> appears.
2. Click [INSTALL PRODUCTS].
ATTENTION
When you select [Yes] for installing
the Error Recovery Guide, [Choose
Setup Language] window appears.
Select a language and follow the
instructions on the window. Error
Recovery Guide will automatically
continue finishing its installation.
Please wait until the installation of
TWAIN driver automatically starts.
ATTENTION
When using Windows 2000 or Win-
dows XP, log on as a user with
"Administrator" privileges.

Fujitsu fi-5110C Specifications

General

Brand	Fujitsu
Model	fi-5110C
Category	Scanner
Language	English