Feed Rollers x 2
Clean lightly taking care not to roughen the surface.
For further information please refer to the
fi-5530C2 Scanner Operators Guide
which can be found on our Website:
http://www.fujitsu.com/emea/products/
January 2010
Using F1 Impregnated Cleaning Wipes
Turn the Scanner ON while cleaning the following locations
PFU Imaging Solutions Europe Ltd
Cleaning Instructions for fi-5530C2 Scanner
Plastic Rollers
Feed Rollers
Glass
Pick Roller
Pad Assy
Eject Rollers
Eject Rollers x 2
Clean lightly taking care not to roughen the surface.
Open the ADF
only if the Function Number Display is
showing “1” through “9”.
Simultaneously hold down the “Send to” and “Scan”
buttons on the operator panel. The Feed Rollers will
start to rotate slowly.
As a guideline, 7 presses of the “Send to” and “Scan”
buttons make the rollers rotate one full turn.
Send to
Scan
Function
Function
Number
Display
LED
Power Button
To Previous Page
Loading...
