HINT
When a double-sided document is scanned in Duplex mode, the scanned document image is
output according to the [Flip Side Rotation] setting in the order presented below:
● Book: Upper half → Lower half
● Fanfold: Lower half → Upper half
ATTENTION
If one of the following settings is set, this function is not available.
● Multi Image Output
● Color/Monochrome Auto Detection
● The resolution is set to 1200dpi
5. Click the [OK] button.
You are returned to the [TWAIN Driver] dialog box.
6. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
Continue scanning in ScandAll PRO.
For information about how to scan documents, see Section "
2.6 How to Use ScandAll PRO."
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/03/c03_13_01.htm (3/3) [2008/10/30 12:42:13]
To Next Page
Loading...
