Fujitsu FI-6140 - Page 139

5.2 How to Check and Reset the Consumables Counters
2. Click the [OK] button on the displayed confirmation message.
The counter is reset to 0.
(The remaining ink indication (percentage) is reset to 100.)
3. If you want to close the [Software Operation Panel] dialog box, click the [OK] button.
Consumables Replacement Message
The following message may appear while using the scanner:
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/05/c05_02_01.htm (3/4) [2008/10/30 12:43:18]