[Default] button
Resets the current settings to the factory setting.
[Save］button
Saves contents of various settings onto the computer.
(Use this button to apply the same settings to other fi-6140 or fi-6240 scanners.)
ATTENTION
Saving outputs the EEPROM value currently written in the scanner. Click the [Apply] button
first if you have changed the value immediately before saving.
[Restore] button
Restores contents of the settings saved onto the computer back to the scanner.
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/08/c08_01_01.htm (5/5) [2008/10/30 12:42:39]
To Next Page
Loading...
