3. To power on/off the scanner by pressing the Power button, select [Enable power switch]. To
power on/off the scanner by connecting/disconnecting the AC cable, select [Disable power
switch].
To power on/off the scanner in conjunction with the computer, select [Enable USB power feeding].
If [Enable USB power feeding] is selected while the scanner is connected through an SCSI cable,
the scanner operation will be the same as when [Enable power switch] is selected.
ATTENTION
Some computer or USB hub models continue supplying power to the USB bus even after
they are turned off.
In such a situation, the option [Enable USB power feeding] may not function properly.
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/08/c08_12_01.htm (2/2) [2008/10/30 12:42:55]
To Next Page
Loading...
