[Gamma] Tab
Pattern
You can configure gamma corrections. The gamma patterns include:
Binary (black and white) specified Normal, Soft, Sharp, Custom, Download
Grayscale/24-bit color specified Custom, Download
Custom Properties
You can specify custom properties (Gamma, Brightness, Contrast, Shadow, and Highlight) only when you select
[Custom] as a Gamma pattern. Type in a numerical value in each box, click the forward/backward arrows, or drag
the slider to increase/decrease the numerical value. Of those items, [Shadow] and [Highlight] can be specified
only when a Color or Grayscale setting is selected under [Mode].
[Color Dropout] Tab
file:////10.232.227.50/Manual/fi-6140_6240C-Ly.../OG/R02/02_081030/contents/EN/02/c02_05_01.htm (12/16) [2008/10/30 12:41:42]
To Next Page
Loading...
