HINT
● In ScandAll PRO, the default [Device Driver] is [TWAIN].
● There is no functional difference between the FUJITSU TWAIN 32 and FUJITSU ISIS
scanner drivers. You can use one of them according to your preferences.
1. From the [Tool] menu, select [Preferences].
The [Setup] dialog box appears.
2. On the [Scan] tab, under [Driver], select either of drivers.
To use FUJITSU TWAIN 32 Scanner Driver, select [TWAIN].
To use FUJITSU ISIS Scanner Driver, select [ISIS].
3. Click the [OK] button to close the [Setup] dialog box.
Selecting a Scanner
To scan documents with a scanner, you have to select its name from the list beforehand.
The following explains how to select a scanner to use.
1. From the [Scan] menu, select [Select Scanner].
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/02/c02_06_01.htm (2/14) [2008/10/30 12:41:47]
To Next Page
Loading...
