C: From the toolbar
1. Place the document on the scanner.
For information about how to place documents, see Section "
2.2 Loading Documents on the ADF for Scanning."
2. From the [Select the Batch File] drop-down list on the toolbar, select a profile to use.
3. Click the [Start Batch Scan] button ( ) on the toolbar.
A document is scanned with the scanner, and the scanned document image is displayed on the ScandAll PRO
window, and then the image is saved to file.
file:////10.232.227.50/Manual/fi-6140_6240C-Ly.../OG/R02/02_081030/contents/EN/02/c02_06_01.htm (13/14) [2008/10/30 12:41:47]
To Next Page
Loading...
