fi-6130 / fi-6230 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
8.1 Scanner Settings
The Software Operation Panel (SOP) will be installed together with the scanner driver (TWAIN/ISIS).
With this application, you can configure settings and functions for the fi-6130 and the fi-6230.
Start up the Software Operation Panel
1. Confirm if the scanner is connected correctly to the PC, then power on the scanner.
2. From the [Start] menu, select [All Programs] → [Scanner Utility for Microsoft Windows] → [Software
Operation Panel].
The [Software Operation Panel] window appears.
Settings
Using the Software Operation Panel, you can configure the following settings for the scanner connected to the PC.
To Next Page
Loading...
