Need help?Do you have a question about the Fujitsu FI-6230 and is the answer not in the manual?
Details on FCC compliance for digital devices and measures against interference.
Compliance with Canadian regulations for radio noise emissions from digital apparatus.
Manufacturer's declaration of conformity with EN45014 and machine noise regulations.
Information on the product meeting ENERGY STAR® guidelines for energy efficiency.
Disclaimer regarding the product's suitability for high-safety applications involving life or health.
Safety precautions and disposal information regarding mercury contained in lamps.
Explanation of how operating systems and applications are referenced using trademarks.
Contact information for PFU LIMITED, the manufacturer.
Importance of reading safety precautions for safe and correct product use.
Explanation of WARNING and CAUTION indications for potential hazards.
Explanation of symbols used for important information and operational advice.
Note that screen examples may change due to product improvements.
Indicates a warning label for high temperature parts on the scanner.
User must not perform repairs; contact store or authorized service provider.
Instructions to prevent damage to AC cables to avoid fire or electric shock.
Requirement to use correct cables to prevent shock or equipment failure.
Ensuring proper grounding to avoid electric shock.
Warning against connecting to multiple-power strips or using incorrect voltage.
Caution against touching the power plug or cable with wet hands to prevent electric shock.
Instructions to wipe dust from power plug metal parts to prevent fire or shock.
Avoid installation in environments with oil smoke, steam, humidity, or dust to prevent fire or shock.
Immediate action if smoke, strange smells, or noises are detected from the scanner.
Procedure to turn off and unplug the scanner if it is damaged.
Warning against inserting liquids or foreign objects into the scanner.
Instructions to unplug the scanner immediately when a trouble occurs.
Warning about high-voltage components inside the scanner.
Avoid using aerosol or alcohol sprays to prevent scanner malfunction or fire.
Ensure scanner is installed on a flat, stable surface to prevent falling.
Ensure the power plug is inserted fully into the power outlet.
Avoid blocking ventilation ports to prevent overheating and scanner failure.
Do not place objects on or stand on the scanner to prevent injury or equipment failure.
Allow scanner to acclimatize to room temperature to prevent condensation errors.
Disconnect cables before moving the scanner to prevent damage or injury.
Install scanner away from magnetic fields and electronic noise to prevent malfunction.
Caution against loose clothing or hair getting caught in scanner mechanism.
Unplug the scanner when not in use for an extended period to save power.
Avoid direct sunlight or heat sources to prevent overheating and potential fire.
Lock the transport lock before moving the scanner to prevent damage.
Procedure to verify all parts are included in the scanner package.
Detailed description of the scanner's front, inside, rear, and removable parts.
Step-by-step guide to powering on the scanner and its operator panel.
Options for powering the scanner on/off via the power button or AC cable.
Explanation of the scanner's automatic power saving mode and how to exit it.
Instructions for loading documents into the Automatic Document Feeder (ADF).
Instructions for loading documents onto the flatbed scanner glass.
Basic steps for scanning documents using the scanner and application software.
Overview of using FUJITSU TWAIN 32 and FUJITSU ISIS scanner drivers.
Configuration and usage details for the FUJITSU TWAIN 32 driver.
Configuration and usage details for the FUJITSU ISIS scanner driver.
Guide to using ScandAll PRO software for scanning documents.
Steps to start the ScandAll PRO application.
How to choose between TWAIN and ISIS drivers within ScandAll PRO.
Procedure to select the desired scanner within the ScandAll PRO application.
Instructions on accessing the scanner driver's configuration settings.
Explanation of Scan and Batch Scan methods within ScandAll PRO.
Detailed guide on creating and using profiles for batch scanning.
Scanning documents via the menu using batch scan profiles.
Scanning documents via the menu using batch scan profiles.
Scanning documents using the toolbar's batch scan profile selection.
Procedure for performing duplex scanning using the ADF.
Instructions for scanning books using the flatbed scanner.
Procedure for scanning large documents using the flatbed scanner.
Tips for scanning documents with varying widths to prevent skewing.
Instructions for scanning documents exceeding standard A4/Letter size.
Guide to creating PDF files from scanned images via ScandAll PRO or Adobe Acrobat.
Steps for saving scanned images as PDF files using ScandAll PRO.
Steps for saving scanned images as PDF files using Adobe Acrobat.
How to remove specific colors (red, green, blue) from scanned images.
Configuration for automatically detecting and removing blank pages during scanning.
Setting up the scanner to detect and prevent multiple pages feeding simultaneously.
Enabling Automatic Deskew function to correct document skew.
Procedure for obtaining both color/grayscale and black-and-white images simultaneously.
Scanner's ability to automatically detect and process color or black-and-white documents.
Function to horizontally split a scanned page into two separate images.
How to remove punch hole marks from scanned document images.
Configuring scanner buttons to launch applications or batch scans.
Configuring scanner buttons (Scan, Send to) to trigger specific actions.
Using patch code sheets to separate scanned documents into job batches.
Using barcodes to separate scanned documents into different folders.
Intelligent Multifeed Function to bypass errors caused by glued documents.
Explanation of the intelligent multifeed function for handling difficult documents.
Settings required before utilizing the Intelligent Multifeed Function.
Overview of cleaning materials and parts that require regular cleaning.
List of recommended cleaning materials and their part numbers.
Standard cleaning cycles for various scanner parts like rollers and glass.
Instructions for cleaning the flatbed scanner glass and plastic cover.
Procedure for cleaning the Automatic Document Feeder (ADF) components.
Specifications and recommended replacement cycles for scanner consumables.
Guide to checking and resetting consumable counters using the Software Operation Panel.
Instructions to check the page counts for consumables like brake and pick rollers.
Procedure to reset consumable counters after replacement.
Step-by-step instructions for replacing the brake roller.
Step-by-step instructions for replacing the pick roller.
Procedure for safely removing jammed documents from the scanner's ADF.
Explanation of error codes and indications displayed on the scanner's operator panel.
List and remedies for temporary errors indicated on the operator panel.
Temporary errors related to cover status, imprinter, or print cartridge.
List and remedies for permanent errors, typically related to hardware systems.
Troubleshooting guide for common scanning issues and their solutions.
Troubleshooting steps if the scanner fails to power on.
Troubleshooting steps if the function number display is blank.
Troubleshooting steps when the scanner does not initiate the scanning process.
Steps to improve image quality for black and white scans.
Troubleshooting steps for poor quality scanned text or lines.
Steps to resolve issues with distorted or blurred scanned images.
Troubleshooting steps for vertical lines appearing in scanned images.
Troubleshooting steps for alarms indicated on the Function Number Display.
Steps to resolve frequent multifeed errors during document scanning.
Troubleshooting steps for frequent document pickup errors.
Steps to resolve frequent paper jam issues.
Troubleshooting steps for elongated scanned images from the ADF.
Steps to resolve shadows appearing on the leading edge of scanned images.
Checklist of information to gather before contacting support for issues.
Information to record regarding the scanner model, serial number, and purchase date.
Troubleshooting PC connection problems, including OS and interface issues.
Troubleshooting issues related to the document feed system.
Troubleshooting issues related to the scanner's imaging system.
General troubleshooting items not covered in other categories.
Information on how to locate and check scanner identification labels.
Diagram showing the location of scanner information and standards compliance labels.
Specifications for the minimum and maximum document sizes that can be scanned on the ADF.
Guidelines on recommended paper types, thickness, and precautions for document scanning.
Recommended paper types for scanner use and precautions for others.
Specifications for paper weight and thickness suitable for the scanner.
List of documents that may not scan successfully or should not be used.
Information on the maximum number of sheets that can be loaded in the ADF based on size and weight.
Identifies areas on documents where punched holes may cause scanning trouble.
Conditions and modes for detecting multifeeds (overlapping, length, or both).
Conditions for detecting multifeeds based on document thickness overlapping.
Conditions for detecting multifeeds based on document length variations.
Conditions for detecting multifeeds based on both thickness and length.
Overview of configuring scanner settings using the Software Operation Panel.
Instructions to launch the Software Operation Panel application.
Explanation of configurable settings available in the Software Operation Panel.
Configuring the scanner's automatic power saving mode and standby time.
Adjusting offset and scan scale to correct image position or elongation.
Configuring multifeed detection methods and detection ranges.
Setting up multifeed detection based on document overlapping.
Setting up multifeed detection based on document length difference.
Setting up multifeed detection based on both overlapping and length.
Function to fill edges of scanned images for a cleaner appearance.
Setting to remove specific colors (red, green, blue) from scanned images.
Enabling Pre-Pick to shorten the time interval between scanning separate documents.
Specifying the number of retries for paper feeding when picking fails.
Setting the page count threshold for consumable replacement notifications.
Configuring timeout settings for manual document feeding.
Selecting how to power the scanner on/off (button or AC cable).
Detailed specifications including scanner type, sensor, light source, scanning area, speed, and interface.
Physical dimensions, installation space, weight, power, and environmental specifications.
Diagrams illustrating the external dimensions of the fi-6130 and fi-6230 scanners.
Steps to configure computer settings for launching applications via scanner buttons.
Configuring scanner buttons (Scan, Send to) to link with applications.
To Next Page
General
