Fujitsu FI-6750S - There Is a Shadow on Leading Edge of Scanned Image

Chapter 8 Troubleshooting
150
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
There is a shadow on leading edge of scanned
image.
Did you adjust the offset (starting position for scanning the
document)?
NO
In the [Device Setting] menu in the Software Operation Panel, adjust the scan
scale in the vertical scanning direction.
For how to adjust the scan scale, refer to "Adjusting the Starting Position for
Scanning [Offset/Vertical Magnification Adjustment]" (page 169).
YES
If you cannot solve the problem after taking the measures above, check the items
shown in "8.4 Before Contacting Your Dealer or Scanner Service Provider" (on
page 152), and then contact the dealer where you purchased the scanner or an
authorized FUJITSU scanner service provider.