Fujitsu FI-6750S - Page 164

Chapter 9 Operational Settings
164
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Scan Setting for
Document in
Dark Background
Color
Specify whether or not to detect
the edge of document in a dark
background color during scanning.
You can specify a density of
background color so the edge will
be detected correctly.
Once this option is enabled, the
settings for scanning documents
with tabs will automatically be
disabled.
Disable/Enable
Density of background color: 1 to 5
levels
Disable NoYes
Overcrop/Under-
crop
Adjust the output image scanned
by enabling the Automatic Page
Size Detection option.
Overcrop: 0 mm to 3 mm (in increments
of 1 mm)
Undercrop: -3 mm to 0 mm (in incre-
ments of 1 mm)
0 mm NoYes
Pick Pressure Specify the pick pressure for
feeding documents.
Low/Mid/High Mid Yes Yes
Item Explanation Selectable Parameters Default Connection via
SCSI/USB
Connector 1
Connection via
SCSI/USB
Connector 2
Yes: Configurable
No: Not configurable