Fujitsu FI-6750S - Page 26

Chapter 1 Scanner Overview
26
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
USB Connector 1 (Common)
A connector for a USB interface cable.
SCSI Connector 1 (fi-6770/fi-6770A only)
A connector for a SCSI interface cable.
CGA Board Slot (fi-6770 only)
Connects a CGA board.
For details of the CGA board, refer to "A.4 Scanner Options" (on
page 195).
CGA Board (fi-6770A only)
For details of the CGA board, refer to "A.4 Scanner Options" (on
page 195).
USB Connector 2 (fi-6770A only)
A connector for a USB interface cable.
SCSI Connector 2 (fi-6770A only)
A connector for a SCSI interface cable.
fi-6770A
fi-6770
fi-6750S
Main Power Switch (Common)
Used to turn the scanner ON and OFF.
Power Connector (Common)
A connector for the power cable.
Ventilation Port (Common)
An open port for ventilating hot air from inside the scanner.
SCSI ID Switch (fi-6770/fi-6770A only)
Used to configure a SCSI ID (ID=5 by factory setting).