Fujitsu FI-6750S - Page 60

Chapter 3 How to Use ScandAll PRO
60
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
7 Click the [Scan] button. ⇒ The document is scanned with the scanner. The scanned image(s)
are displayed on the ScandAll PRO window, and then saved to a
file.
For information about other methods of scanning documents using
ScandAll PRO, refer to "Chapter 5 Various Documents" (on page 73).
When using the FUJITSU TWAIN 32 scanner driver, click-
ing the [Scan] button may display the scanner driver's
setting dialog box. If so, you can also change the settings
in the dialog box displayed.
Click the [Scan] button to scan the document.
Click the [Close] button when you finish scanning.
If you do not want to display the scanner driver’s setting
dialog box, clear the [Show TWAIN dialog before each
batch scan process] checkbox in the [Scan Settings]
dialog box.
• If you unmark the [Save to file] checkbox in the [Scan
Settings] dialog box, the scanned document image(s)
will no longer be saved to a file.
To save the image(s) to a file, select the [File] menu
D[Save As].
• To scan documents with the same settings afterwards,
select the [Scan] menu
D [Scan].
• For more details about the features and operations of
ScandAll PRO, refer to the ScandAll PRO Help.