Important notes
Important notes
ImportantnotesNotes
In this chapt er you will find information regarding safety w hich it is essential to
take note of when working with your device.
Safety notes
SafetynotesNote
Please follow the safety
notes provided in the "Safety/R egulation s" manual
as well as the safety note
s given below.
When installing and ope
rating the device, please observe the notes on ambient
conditions in "
Technic
al data ", Page 29 and th e instructions in "Getting started", Page 14 .
The device may only b e o
perated up to a maximum height of 3000 m
(9842 ft) (for C hin a on
ly 2000 m (6557 ft)).
Caution, component
s in the system can get very hot.
The activities desc
ribed in these instructions must always be
performed with the
greatest care.
For system expansi
ons and repairs to the unit, re fer to the manual “System
Expansions and R e
pairs”. Some of the activities described in this manual may only
be performed by au
thorized personnel. Improper repairs may cause danger to the
user (electric sh
ock, fire hazard) or material damage to the unit.
Operate the dev
ice only with the casing closed.
Power cable and mains adapter:
The supplied power cable conforms to the requirements of the country in
which you purchased yo ur device. Make sure that the power cab le is approved
for use in the country in which you intend to use it.
The mains adapter’s power cable should only be c onne cted t o a mains
socket if the device is connected.
Do not use the mains adapter for other devices.
Use only the mains adapter which is intended for use with the device,
see chapter "
Technical data ", Page 29.
Make sure that the rated current of the mains adapter is not higher than that of
the power system to which you connect the mains adapter.
ON/OFF switches do not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the power socket.
Fujitsu 11
To Next Page
Loading...
