To Next Page
J
Jennifer SosaSep 6, 2025
Why is my Fujitsu Air Conditioner not responding to the remote?
- Ssarah61Sep 6, 2025
If the unit operates differently from the remote controller setting, replace or correctly load the batteries in the remote controller.
Why is my Fujitsu Air Conditioner not responding to the remote?
If the unit operates differently from the remote controller setting, replace or correctly load the batteries in the remote controller.
What to do if thermo sensor display on Fujitsu Halcyon remote controller is flashing?
The room temperature sensor may be malfunctioning. Please consult authorized service personnel.
How to improve cooling performance of Fujitsu Halcyon?
If your Fujitsu Air Conditioner is exhibiting poor cooling (or heating) performance, consider the following: 1. **Air Filter:** Clean or replace the air filter if it's dirty. 2. **Intake/Outlet:** Ensure the intake grill or outlet port of the indoor unit isn't blocked; unblock if necessary. 3. **Temperature:** Adjust the room temperature appropriately. 4. **Openings:** Close any open windows or doors. 5. **Sunlight:** Manage sunlight exposure during cooling operation. 6. **Heat Sources:** Reduce heating sources or the number of occupants in the cooling space. 7. **Fan Speed:** Set the fan speed to 'LOW' or higher for better performance, instead of 'QUIET'.
What to do if my Fujitsu Halcyon Air Conditioner does not turn on?
If your Fujitsu Air Conditioner does not operate at all, check if the circuit breaker has been turned off, if there has been a power outage, or if a fuse has blown out or the circuit breaker has been tripped. Also, check if the timer is operating.
Why does the air flow stop in my Fujitsu Air Conditioner?
There are several reasons why the airflow might stop in your Fujitsu Air Conditioner: * When heating starts, the fan may not operate or will operate at a very low speed to allow internal parts to warm up. * During heating, if the room temperature rises above the thermostat setting, both the indoor and outdoor units will stop. To continue warming the room, set the thermostat higher. * The unit will temporarily stop during heating (for 7-15 minutes) for Automatic Defrosting. * The fan might stop or run at a very low speed while the unit monitors the room temperature. * In multi-type units, if multiple units operate in different modes, units started later will stop; this will be shown on the remote controller display of the stopped indoor units.
General| Cooling Capacity | Varies by model (e.g., 9, 000 BTU to 36, 000 BTU) |
|---|---|
| Refrigerant | R-410A |
| Noise Level | Varies by model (e.g., 19-49 dB(A), Outdoor: 48-56 dB(A)) |
| Airflow | Varies by model |
| Voltage | 208/230V |
| Sound Level | Varies by model (see Noise Level) |
| Indoor Unit Dimensions | Varies by model |
| Outdoor Unit Dimensions | Varies by model |
| Weight | Varies by model |
| Power Supply | 208/230V |
| Operating Temperature (Cooling) | Varies by model (e.g., 14°F - 115°F) |
Procedures posing risk of death or serious injury to user or personnel.
Procedures posing risk of death or serious injury to user.
Procedures posing risk of personal harm or property damage.
Steps to set the remote's clock and day.
How to start/stop, set mode, temperature, and fan speed.
How to activate and use the energy-saving mode.
Setting operating times for each day of the week.
Step-by-step guide to cleaning the air filters.
How to check for errors and what "E:EE" means.
No operation, noise, smells, mist, steam.
Checks for power, fuse, timer issues.
Checks for dirty filters, blocked vents, incorrect settings.
