Working with the no tebook
Inserting battery
3
1
3
2
4
► Position the rechargeable battery at the edge and fold it in the direction of th e arrow (1).
► Slide the release button in the direction of the arrow (2) and hold it in place.
► Slide the rechargeable battery in the direction of the arrow (3) until yo u feel it engage.
► Slide the release button in the direction of the arrow (4).
► Complete the removal, see chapter "
Finishing component removal", Page 54.
Optical drive (optional)
Opticaldri
ve
This product contains a light emitting diode, classification accord ing to IEC 60825
1:2007: LASER CLASS 1, and must therefore not b e opened.
Handling data carriers
Handlin
g
Observe the following guidelines when handling data carriers:
• Avoid touching the surface of a data c arrier. Only handle data carriers by their edges.
• Always store data carriers in their c ases. This will protect the data carrier against
being covered in dust, scratched or damaged in any other way.
• Protect your data carriers against dust, mechanical vibrations and direct sunlight.
• Avoid storing a data carrier in areas subject to high temperatures or humidity.
You can use data carriers with a diameter of 8 cm / 3.15" or 12 cm / 4.7" i n the drive.
When using a data carrier of lesse r quality, vibrations and reading errors may occur.
32 Fujitsu
To Next Page
Loading...
