Removing and inst alling compone nts
during servicing
Removing the cover
2
1
► Remove the screw (1).
Keep the screw in a safe place . If you are removing several compo nents at th e same
time, store the screws for the individual components separately from each other.
When installing th e cover, you must use the co rrect screws.
If you install the wrong screws, components ma y be damaged.
► Lift the cove
r off the notebook (2).
Removing memory modules
3
2
1
1
► Carefully push the two mounting
clips outwards (1).
MemoryexpansionMemorymodule
The memory module snaps upwards (2).
► Pull the memory module out of its slot
in the direction of the arrow (3).
Fujitsu 49
To Next Page
Loading...
