Removing and installing com ponents
during servicing
Attaching the cover
1
2
► Place the cover into position, following the direction of the arrow (1).
When installing the cover, you must use the correct screws.
If you install the wrong screws, compon ents may be damaged.
► Fasten the cover in place with the screw (2).
Finishing component removal
After you have removed or changed the system components a s you required, please
prepare your device for operation again as follows:
► Install the battery again ( see "
Inserting battery", Page 32).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected before.
54 Fujitsu
To Next Page
Loading...
