Settings in BIOS Setup Utility
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSe tup UtilityConfiguration, B IOSSetup UtilitySetupS ystemc onfigurationHardwareconfigu ration
The BIOS Setu p Utility allows you to set the system functions and the hardware
configuration for the notebook.
When it is delivered, the notebook is set to factory default settin gs. You can
change these settings in BIOS Setup Utility. Any changes you make take effect as
soon as you save and exit the BIOS Setu p Utility.
The BIOS Setup Utility program contains the following menus:
About
Displays information relating to the BIOS, processo r and notebook
System
Advanced system settings
Advanced
Configuration of various hardware co mponents, such as mo use , keyboard,
processor
Security
Password settings and security fu nctions
Boot
Configuration of the start-up se quence
Exit
Exits the BIOS Setup Utility
Starting the BIOS Setup Utility
► Reboot the devi
ce (switch off/on or reboot the operating system).
BIOSSetupUtility
Depending on the BIOS Setup Utility setting for Fast B o ot the following message
may appear on the screen at start-up:
<F2> BIOS Set
up <F12> Boot Menu
► Press the fu
nction key
F2
.
► If a password h as been assigned, enter the password and press the En ter key.
If you have forgotten the password, contact your system administrator
or contact our customer service centre.
The BIOS Setu p Utility starts.
Fujitsu 55
To Next Page
Loading...
