Working with the notebook
Connecting the noteboo k to the Port Replicator
The suitable power adapter must be connected to the port replicator when
the notebook is connected to the port replicator.
We recommend that the notebook is not operated with the LCD screen closed when
the notebook is connected to the Port Replicator. The resulting overheating can
cause reduced performance and increased activity of the integrated fan.
PortReplicator
► If the power adapter cable is connected to the notebook, disconnect it from the
Intel® Thunderbolt
TM
4 USB Ty pe-C port of the notebook.
1
a
► Position the notebook so that the back edge is in line with the mark (a) of the port replicator.
► Place the notebook onto the Port Replicator (1) and ensure that it locks into place correctly.
Fujitsu 47
To Next Page
Loading...
