Working with the noteb ook
Connecting the mains adapter to the Port R eplicator
3
1
2
► Connect the power cable (1) to the power
adapter provided for the device, see
chapter "
Technical data", Page 76.
► Plug the power cable into the mains
socket (2).
► Connect the mains adapter c able to the DC
jack (DC IN) of the Port Replicator (3).
When the notebook is connected to a Port Replicato r, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This profile will be loaded, as
soon as th e notebook is connected to a Port Replicator of the same type.
Switching on the notebook via the port replicator
► Press the ON/OF F button on the port
replicator to switch the notebook on.
The power-on indicator of the Port
Replicator lights up.
48 Fujitsu
To Next Page
Loading...
